Bouncer Inline Beer Wine Filter Homebrew

Description

Stay connected, sign up for our periodic newsletter. We will keep you posted on sales and newly added items to our store. Click the "sign up for newsletter" link located to the right of our logo.
Buy with confidence, Mistucky Creek Homebrew is an authorized retailer for Bouncer
Features
improves the taste and clarity of your beer by filtering trub, krausen, hops, and proteins
built to last, use it over and over, custom molded from high quality thermoplastic and T304 stainless steel in the USA, use up to 150F
saves time and beer, pays for itself in a few batches, get more beer out of each batch, easier and quicker than cold crashing or additives
easy to use and clean, gravity fed using your racking siphon, no need to pressurize or pump, fewer parts to clean and sanitize
The Classic Bouncer fits 3/8'' inner diameter siphon tubing
The Mac Daddy fits both 3/8" a& 1/2" tubing (includes both size barbed fittings)
Includes course filter screen. Fine filter screen can be purchased separately here
https://www.ebay.com/itm/273365656286
The Bouncer Pro -
Connectivity:
Stainless steel 1.5 inch tri-clamp and 1″ NPT female
Screens:
Red 20 mesh (915 micron), Blue 50 mesh (304 micron), and White 80 mesh (178 micron)
Filter Area:
29.73 square inches (19,181 square mm)
Max operating pressure:
up to 150 psi at 21 C / 70 F and 100 psi at 52 C / 125 F
Weight:
1 pound, 8 oz. / .69kg (with try-clamp adapters and white screen)
Accessories included:
Stainless steel tri-clamp adapters, roll of pipe thread tape, three screens
Brew better-tasting and clearer beer, in less time, without waste or additives with BOUNCER inline beer filters. Finally, an affordable and reusable filtration solution for home brewers! Use the Bouncer inline between your fermenter and keg, or between your boil kettle and your fermenter. Removes trub, hops, and particulates without aerating. It's easy to add to your setup, easy to clean, and easy to use. You'll get more out of each batch, since you don't have to avoid the trub layer as carefully. Pays for itself in a few batches! There are three basic ways to use the Bouncer inline filter: 1) out of the brew kettle 2) out of the fermenter 3) out of your serving tap. To use your bouncer out of the brew kettle, simply connect it to your brew kettle valve with standard tubing, or cut your siphon tube line near the top, and insert the barbs into the tube. Pay attention to the arrow that indicates the flow direction. Make sure you have disassembled the bouncer and dipped it in sanitizer just before you use it. Then open your valve, or pump your siphon. If the flow decreases too much, you can stop the flow, remove the bowl and filter, rinse, sanitize, reinstall, and keep going. On a heavily hopped IPA, or a 10 gallon batch, you might find you need to clear it several times. To use your Bouncer out of your fermenter, cut your siphon tube near the top, and push the barb ends into the tubes, paying attention to the flow direction arrow. The barb ends fit a standard siphon. Make sure to sanitize right before you use it. You might find a bubble develop in the filter bowl - this isn't air, it's carbon dioxide from your beer. Just lift the barbed ends so they are level and the bubble should clear down the tube. Finally, you can hack a mini Randall out of your bouncer. Try orange peels for a Blonde Ale, cracked coffee beans in a Porter, or cloves in your Pumpkin Ale.
Return Policy
To ensure that your account is properly credited, do not return any merchandise without prior authorization from Mistucky Creek Homebrew
All returns must be in "as new" condition, unused, unaltered, and with all original packaging, hardware, instruction manuals, etc. Once an item has been used, it can no longer be accepted for return.
No returned merchandise will be accepted after 30 days of delivery.
The customer is responsible for return shipping costs. Mistucky Creek Homebrew will send a prepaid return label if the return is due to an error on our part or damage during transit.
Shipping charges are non-refundable. If an item being returned for credit originally qualified for free shipping, the actual shipping charges will be withheld from the amount refunded.
The RMA number must be clearly written on the shipping label. Failure to do so may substantially delay the processing of your credit.
All returns will be inspected once they are received by the warehouse. Credit will not be issued for items which are returned in poor condition or have not been returned following the process outlined in this return policy. If your return is denied, the item may be returned back to you at your cost.
Once your return has been received, inspected, and accepted by the warehouse, you will be issued a refund. Please allow 5 business days for your return to be processed after it has been received by the warehouse.
Mistucky Creek Homebrew is not responsible for any returned merchandise that is lost during shipment. Make sure that all returned merchandise has a tracking number and is properly insured