Pentom Takeuchi TL140 CTL70 Sprocket RARE option- Part Number: 882160010, 182792

Description

This is the replacement aftermarket drive sprocket option for the Takeuchi TL 140 compact track loader.
This sprocket fits the Takeuchi TL 140 if your serial number is less than 21402001
and the Gehl CTL 70 if your serial number is below serial number 1390
. T
his sprocket is also interchangeable with the GEHL and Mustang track loaders.
The difference is in the diameter of the mounting hole
. If you are not certain of your serial number please submit the diameter of your mounting hole prior to ordering.
Sprocket Specs:
Bolt Holes: 9
Number of Teeth: 14
Inside Diameter: 7 7/8 Inches
Outside Diameter: 18 1/2 Inches
Width at Base of Tooth: 7/8 Inches
Alternate Part Number:
Takeuchi dealer part number: 08821-60010, 882160010
Gehl dealer part number: 182792
Alternate Model:
The 08821-60010 and 182792 sprocket is known to fit the the
Takeuchi TL140 if your serial number is lower than 21402001
, and the
Gehl CTL 70 if your serial number is below serial number 1390
.
Alternate Part:
The 881160110 part is an option for your TL140 above 21402001 and Gehl CTL70 serial numbers above 1390.
There are two sprocket options on the Takeuchi track loaders. The difference is in the size of the mounting hole that goes over the drive motor. If you are in doubt just check the diameter of the mounting hole on your drive sprocket
882160010 - Mounting Hole Diameter: 7 7/8 Inches
881160110- Mounting Hole Diameter: 9 1/2 Inches
If your serial number is above those listed, you need part number 881160110.
We cannot ship to P.O. Boxes. Free shipping only applies to lower 48 states.
We offer all of your other undercarriage
parts so save time & money by purchasing rollers, sprockets, idlers and rubber tracks at the same time!
**Please note this listing
does not
come with a warranty.